The Reason Why the Hydraulic System Motor Can't Drive the Pump

The reason why the hydraulic system motor can't drive the pump

1. Adjust the overflow valve, check the system pressure from small to large, to normal working pressure, adjust the overflow valve;

2. When the hydraulic system is not working, the system should perform pressure relief and overflow. If the pump is stopped during this period and the motor does not work, the valve may be blocked. Check and try again after cleaning, there should be no problem;

3. If the overload setting of the motor itself is too low, it will trip and stop the pump. This situation may also occur, and some components are of poor quality;

4. Other hydraulic valves or poor oil flow in the system cause excessive pressure and the system is overloaded to stop the pump;

5. There is a problem with the line;